Hunan Zhonggong Mining Engineering Technology Co., Ltd

PRODUCTS

Mixing tank

The main characteristics of the mixing equipment of our company: the design adopts the scheme of low speed and large impeller, and is equipped with the structural design of deflector and baffle, so that the slurry can form a "W" flow direction, so as to achieve the goal of low energy consumption, low wear and effectively extend the overall service life of the equipment.

Classification：

Mixing tank

Consultation

Inquiry

Product Introduction

Introduction

The main features of the mixing equipment of our company: the design adopts the scheme of low speed and large impeller, and is equipped with the structural design of guide plate and baffle plate, so that the slurry can be formed“ W” Flow direction, so as to achieve the goal of low energy consumption, low wear and effectively extend the overall service life of the equipment. High mixing intensity, no settling tank, high slurry suspension, and guide cone at the bottom of the tank to eliminate mixing“ Dead Corner”, Avoid particle deposition and stacking, which can be used for ore density≥ 3.0t/m³, pulp concentration 30— 50% high concentration pulp mixing; The material (pulp) enters the conical spinning drum from the upper side of the tank to mix with the agent added from the tank top for preliminary mixing, and then enters the tank center. After mixing, the material (pulp) is discharged from the upper overflow weir to prevent the material from“ Short Circuit”, At the same time, the agent can get full effect on the material surface.

Features

Compared with domestic general mixing tanks, the main technical features of high efficiency mixing tanks are:

(1) High efficiency. The unique fluid flow path design enables the slurry in the tank to circulate up and down according to the W-shaped flow path, and the solid particles in the slurry are fully dispersed. Cooperate with the unique reagent adding device to evenly and fully disperse the reagent in the pulp, accelerate the effect of the reagent, and thus reduce the consumption of the reagent.

(2) Low energy consumption. The mixing tank is optimized with a new type of low energy consumption matching cylinder, mixing impeller, deflector and baffle plate. Compared with the domestic general mixing tank, the power consumption per unit volume is reduced by 1/4— 1/3.

(3) Low wear. It can effectively extend the overall service life of the equipment. Under the same impeller material, the service life of the impeller can be increased by more than 6 times. If it is lined with wear-resistant rubber, it can be increased by more than 10 times.

(4) High strength, no sink, high slurry suspension, especially suitable for ore density ge; 3t/m3 slurry mixing.

(5) Easy to maintain. The parts are easy to disassemble, manufacture and maintain.

(6) The reducer with German famous brand is maintenance free, which extends the service life of shaft and bearing.

Technical parameters

Specification and model （mm）	Inside diameter of groove （mm）	Height in groove （mm）	Effective volume （m³）	Impeller diameter （mm）	Impeller speed （r/min）	Motor		Weight （kg）
Specification and model （mm）	Inside diameter of groove （mm）	Height in groove （mm）	Effective volume （m³）	Impeller diameter （mm）	Impeller speed （r/min）	Model	Power（KW）	Weight （kg）
ZGJ-1000	1000	1000	0.70	500	120	Y100L-6	2.2	1200
ZGJ-1500	1500	1500	2.2	500	120	Y132S-6	3	1840
ZGJ-2000	2000	2000	5.46	800	120	Y132M-4	7.5	3400
ZGJ-2500	2500	2500	11.2	850	135	Y160M-4	11	4120
ZGJ-3000	3000	3000	17	1450	100	Y200L2-6	15	6530
ZGJ-3500	3500	3500	30.4	1500	62	Y250M-8	22	7500
ZGJ-4000	4000	4000	45	1800	100	Y280S-8	30	8200
ZGJ-5000	5000	5500	86	2400	33	Y280S-8	30	19400